Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 26)

4. Operation Procedures
26 PNEG-1895 V2 Electronic Distributor Control
Create/Modify Spout Name
1. From the “Setup Menu”, select “Position Names” to bring up the “Create/Modify Spout
Names” screen.
2. Press the spout name to be modified to display an alphanumeric keypad. (See Figure 4L.)
Figure 4L Alphanumeric Keypad
3. Type in the desired name for the spout position and press “enter”.
4. Select “OK” to return to “Setup Menu”.
Create/Modify Distributor Name
1. From the “Setup Menu”, select “Position Names” to bring up the “Create/Modify Spout
Names” screen.
2. Next to ochre “Distributor Name” label, press the distributor name to display an alphanumeric keypad.
(See Figure 4L.)
3. Type in the desired name for the spout position and press “enter”.
4. Select “OK” to return to “Setup Menu”.