Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 32)

4. Operation Procedures
32 PNEG-1895 V2 Electronic Distributor Control
Help Menu Screen
The help menu has six (6) options for displaying troubleshooting information for different faults that may
appear during the operation of the distributor and for checking diagnostic parameters.
(See Figure 4T.)
Figure 4T Help Menu Screen
Encoder Fault: Displays the “Encoder Fault” screen which displays fault codes and solutions for faults
related to the function of the encoder during movement.
(See Figure 4U on Page 33.)
Drive Fault: Displays the “VFD” Fault screen which offers possible causes and solutions to faults caused
by the variable frequency drive.
(See Figure 4V on Page 33.)
Homing Fault: Displays the “Homing Fault” screen which offers possible causes and solutions to faults
caused by a timeout of the homing procedure.
(See Figure 4W on Page 34.)
Overtravel Fault: Displays the “Overtravel Fault” screen which offers possible causes and solutions to
faults caused by the an overtravel condition.
(See Figure 4X on Page 34.)
Direction Fault: Displays the “Direction Fault” screen which offers possible causes and solutions to faults
caused by the detection of a rotation direction conflict.
(See Figure 4Y on Page 35.)
Diagnostic Screen: Displays the status of the inputs and outputs of the Programmable Logic Controller
(PLC) as well as the current encoder position count and rotation direction.
(See Figure 4Z on Page 35.)