Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 42)

6. Retrofit Installation
42 PNEG-1895 V2 Electronic Distributor Control
Sensor Plate Angle and Proximity Sensor Bracket Installation
Assemble the sensor plate angle (DEC0014) (A) to the proximity sensor bracket (DEC0006) (D) using
three (3) 1/4"-20 x 3/4" HHCS bolts (S-1429) (B) and 1/4"-20 nylock nuts (S-7025) (C) as shown in
Figure 6C .
Attach the proximity sensor bracket (DEC0006) (D) to the inside of the enclosure (DEC0005) (E) using
three (3) 1/4"-20 x 3/4" HHCS bolts (S-1429) (B) and 1/4"-20 nylock nuts (S-7025) (C).
(See Figure 6C.)
Bracket must be installed with note markings facing down.
Figure 6C Sensor Plate Angle and Proximity Sensor Bracket
Ref # Part # Description
A DEC0014 Sensor Plate Angle
B S-1429 1/4"-20 x 3/4" HHCS Bolt
C S-7025 1/4"-20 Nylock Nut
D DEC0006 Proximity Sensor Bracket
E DEC0005 Enclosure