Interval screen, Homing interval screen – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 User Manual
Page 30
Advertising
![background image](/manuals/277877/30/background.png)
4. Operation Procedures
30
PNEG-1895 V2 Electronic Distributor Control
Homing Interval Screen
The homing interval screen allows the user to set the number of times the distributor position may be
moved before a warning displays for home position re-calibration. A default value of 50 is standard.
Figure 4Q Homing Interval Screen
Setting Homing Interval
1. To access the homing interval from the “Setup Menu”, select “Homing Interval” to display the “Homing
Interval” setup screen.
2. Press the button under the “Homing Interval” label. A number keypad will display.
Figure 4R
3. Insert the desired value and press “enter”.
4. Select “OK” to apply changes and return to “Main Menu”.
Advertising