Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 13)

3. Electrical Installation
PNEG-1895 V2 Electronic Distributor Control 13
Sensor Wiring Connections to Connector Box
Pull sensor cable through conduit to enclosure. (See Figure 3F.)
Figure 3F Control Panel Wiring to Junction Box Electrical Connections
Ref # Part # Description
A DEC0108 Home Proximity Sensor Cable
B DEC0105 Connection Enclosure
C DEC0106 Encoder
D DEC0109 Over-Travel Proximity Sensor Cable
E DEC0026-XXX Sensor Cable
NOTE: “XXX” represent the length of the cable.
B
A
D
E
C