Enclosure covers installation, Electrical installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 User Manual
Page 14
Advertising
3. Electrical Installation
14
PNEG-1895 V2 Electronic Distributor Control
Enclosure Covers Installation
Once all wiring is complete, install the two (2) side access covers (DEC0012) (A) using four (4)
1/4"-20 x 3/4" HHCS bolts (S-1429) (D) and 1/4" lock washer (S-2041) (C) each and install the bottom
enclosure cover (DEC0013) (B) using ten (10) 1/4"-20 x 3/4" HHCS bolts (S-1429) (D) and 1/4" lock
washers (S-2041) (C) as shown in
. Ensure that no wires are pinched or damaged when
installing access covers.
Figure 3G Enclosure Covers Installation
Ref #
Part #
Description
A
DEC0012
Side Access Cover
B
DEC0013
Bottom Enclosure Cover
C
S-2041
1/4" Lock Washer
D
S-1429
1/4"-20 x 3/4" HHCS Bolt
Advertising