Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 27)

4. Operation Procedures
PNEG-1895 V2 Electronic Distributor Control 27
Position Locations Screen
This screen allows the user to adjust the spout positioning so it lines up with the center of the distributor
discharge. Adjustments can be made individually or an offset can be used to adjust all spouts by the same
amount.
(See Figure 4M.)
Figure 4M Modify Spout Positioning
Modify Spout Positioning
1. From the “Setup Menu”, select “Position Locations” to bring up the “Modify Spout Positioning” screen.
2. In the “Modify Spout Positioning” screen select the spout that requires adjustment by touching the
value pad next to the spout number balloon. A number keypad will display. (See Figure 4N.)
Figure 4N Number Keypad