Proximity sensor location and installation, Retrofit installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 User Manual
Page 43
![background image](/manuals/277877/43/background.png)
6. Retrofit Installation
PNEG-1895 V2 Electronic Distributor Control
43
Proximity Sensor Location and Installation
NOTE: The location of the proximity sensor will be determined by the configuration of the distributor.
Using the table shown in
, locate the diameter and number of spouts of the distributor being
used and note the proximity sensor reference number. This reference number is marked on the bottom
of the proximity sensor bracket (DEC0006) (B) and identifies the location for installing the proximity
sensors (DEC0107) (A).
Install the two (2) proximity sensors (DEC0107) (A) into the proximity sensor bracket (DEC0006) (B) at the
appropriate locations determined from the table.
Figure 6D Proximity Sensor Location
Ref #
Part #
Description
A
DEC0107
Proximity Sensor
B
DEC0006
Proximity Sensor Bracket
Diameter # Spouts Prox Ref #
6
4
2
6
5
8
6
8
6
5
8
7
10
9
10
6
4
8
10
10
9
12
4
1
6
3
8
8
10
9
14
4
1
6
3
8
8