Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 50)

6. Retrofit Installation
50 PNEG-1895 V2 Electronic Distributor Control
Motor Mounting Bracket Installation
Install the motor mounting bracket (DEC0003) (A) to the enclosure (DEC0005) (E) using two (2)
1/4"-20 x 3/4" HHCS bolts (S-1429) (D), 1/4" washers (S-2126) (C) and 1/4"-20 nylock nuts (S-7025) (B)
as shown in
Figure 6L .
Figure 6L Motor Mounting Bracket
Ref # Part # Description
A DEC0003 Motor Mounting Bracket
B S-7025 1/4"-20 Nylock Nut
C S-2126 1/4" Washer
D S-1429 1/4"-20 x 3/4" HHCS Bolt
E DEC0005 Enclosure