Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 24)

4. Operation Procedures
24 PNEG-1895 V2 Electronic Distributor Control
Configuration Setup Screen
This screen allows the user to change the distributor’s spout diameter property, total of number of spouts
and for resetting the distributor back to the default settings.
(See Figure 4I.)
Figure 4I Configuration Setup Screen
Diameter of Spouts: Press the button that matches the size of the spout that is currently installed on the
distributor. The diameter that is selected will turn green and the number of spouts available for that
diameter will be displayed.
Number of Spouts: Press the button that matches the current configuration of the distributor. The number
that is selected will turn green. The number of spout options will change according to the diameter of
spout selected.
Reload Defaults: If during operation, any configuration parameters are altered from the original settings,
pressing this button will revert settings to the default values.
OK: Press this button to save the current configuration and be brought back to the Setup Menu.
NOTE: A warning message will appear if distributor has already been previously configured.
(See Figure 4J.)
Figure 4J