Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 19)

PNEG-1895 V2 Electronic Distributor Control 19
4. Operation Procedures
Initializing Screen
When powering up the distributor the first screen that appears is the “Initializing” screen. (See Figure 4A.)
During a first time start-up, press the “Diagnostic Screen” button to proceed to the diagnostic screen in
order to complete start-up checklist. If the start-up checklist has already been completed, press OK to
initialize system. Distributor will move to “HOME POSITION” to verify positioning, then display the
MAIN screen.
Figure 4A Initial Start-Up Screen