Setup menu screen – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 User Manual
Page 23
4. Operation Procedures
PNEG-1895 V2 Electronic Distributor Control
23
Setup Menu Screen
Figure 4H Setup Menu Screen
Configuration Setup: Displays the machine setup screen that allows the user to change the distributor’s
parameters or reload default values. See “Configuration Setup Screen”
Position Names: Allows the user to assign or change the name of each spout position and to create or
change a name for the distributor. See “Position Names Screen”
.
Position Locations: Displays the positioning screen which allows the user to set the value that aligns the
spouts with the distributor. See “Position Locations Screen”
.
Position Lock-Out: Allows the user to lock or unlock spouts from being used. See “Position Lock-Out
Screen”
Homing Interval: Allows the user to set the number of times before the “Perform Homing Now” warning
appears. See “Homing Interval Screen”
Perform Homing Now: Press this to perform the homing operation to re-calibrate the distributor.