Proximity sensor adjustment, Retrofit installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 User Manual
Page 45
Advertising
![background image](/manuals/277877/45/background.png)
6. Retrofit Installation
PNEG-1895 V2 Electronic Distributor Control
45
Proximity Sensor Adjustment
Set the clearance of the two (2) proximity sensors (DEC0107) (A) to 0.050" ± 0.01" from the face of each
sensor to the flag (B) on the shaft (DEC0009).
This adjustment may need to be made
after motor is wired by using manual key switch to locate flag above each proximity sensor.
Figure 6F Proximity Sensor Adjustment
Ref #
Part #
Description
A
DEC0107
Proximity Sensor
B
Flag
Advertising