YSI TruLab 1320P - Manual (Page 76)

Settings TruLab pH/ISE 1320
76
ba76157e01 03/2014
9.3.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values and calibration records (see section 10 D
ATA STORAGE , page 78).
9.4 Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
9.4.1 Resetting the measurement settings
The following settings for pH measurements are reset to the default settings
with the Reset function:
pH
System / Printer Settings for the integrated
printer of the TruLab pH/
ISE 1320P.
For details, see section 4
P
RINTER ( ONLY T RU L AB P H/
ISE 1320 P), page 14
System /Clock Date format
Datum
Time Time and date settings (see
section 5.4.6 E
XAMPLE 2 ON
NAVIGATION : S ETTING THE DATE
AND TIME , page 25)
System /Service infor-
mation Hardware version and software
version of the meter are dis-
played.
System /Reset - Resets the system settings to
the delivery condition (see sec-
tion 9.4.2 R
ESETTING THE SYS -
TEM SETTINGS
, page 77).
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Menu item Possible set-
ting Description
Setting Default settings
Buffer YSI
Calibration interval 7 d
Unit for slope mV/pH
Measured parameter pH