Datamax-O'Neil Performance series User Guide - Manual (Page 103)

Menu System | 4
125 Performance Series User’s Guide
a mass storage device must be placed in a directory called user_configs at the root
(top) level of the storage device (e.g. E:\user_configs).
These settings include the ones listed in the Setting Report from the Info menu and
exclude adjustments and calibration settings.
Note: User Setups names cannot contain a space character.
Note: User Setup files will not save adjustment (fine adjustment) values. If transferred to
another printer, these values will have to manually set.
Organize
To copy, delete or rename a printer configuration setup file to or from a mass
storage device connected to the USB host, perform the following steps:
a. Copy
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate user setup file.
3. Select the green Accept button to continue.
4. Select Copy.
5. Select the green Accept button to confirm.
b. Delete
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate user setup file.
3. Select the green Accept button to continue.
4. Select Delete.
5. Select the green Accept button to confirm.
c. Rename
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate user setup file.
3. Select the green Accept button to continue.
4. Select Rename.
5. To confirm, select the green Accept button.
6. Using the alpha-numeric keypad, type a name in the entry field.
R
N