Datamax-O'Neil Performance series User Guide - Manual (Page 48)

3 | Connections and Setup
Performance Series User’s Guide 40
Optional Rewinder
The rewinder is designed to rewind in either direction but the direction must be set
through the menu.
Note: Either the peel plate or the rewinder plate must be installed.
Installation of Media
1. Route the media through the platen carriage assembly.
Note: Follow the instructions for the installed media hanger.
2. Route the media under the platen carriage and around the rewinder shaft.
3. Remove the metal clasp and wind the media around the rewinder shaft in the
desired direction.
Figure: 3 - 23 Rewinder
4. Insert the edge of the media into one of the two grooves on the rewinder shaft.
Counter Clockwise
Clockwise
Metal Clasp