Datamax-O'Neil Performance series User Guide - Manual (Page 18)

2 | Overview
Performance Series User’s Guide 10
p1120n Standard Features
The p1120n thermal printer has the following standard features:
Table 5: p1120n Standard Features
Features Descriptions
Max Print Speed 8 IPS / 203 mmps
Resolution 300 dpi / 11.8 dpmm
Memory 32MB Flash (4MB User Space) / 64MB DDR2 SDRAM
Printer Type • Direct Thermal
• Thermal Transfer (Optional)
Media Supply • Fan fold
• Roll-fed
• Die-cut
• Continuous Labels: perforated or continuous tag/ticket stock (8”
[203mm] roll max diameter on 1.0”, 1.5” or 3” [25mm, 38mm or
76mm] core).
Double-sided Top-of-Form
Sensor Adjustable position for center-biased stock:
• Label Gap
• Notch
• Reflective black mark on the bottom or the top of the form
Tear Bar Removable bar for tearing off gapped or continuous media.
Media Back Feed Capable of backing up at least 1.0” (for near edge printhead).
Control panel LED backlit color QVGA LCD with touchscreen.
Reset Button Inset on the rear of the unit for recovery or the resetting of the screen
calibration.
LEDs Two LEDs on the front panel for Power and Error.
Power Switch Positioned on the rear of the unit.
Chassis / Media Cover Diecast construction with a clear side window.
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• PCL Bitmap
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file formats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)