Datamax-O'Neil Performance series User Guide - Manual (Page 86)

4 | Menu System
Performance Series User’s Guide 108
e. Options
The following settings may be adjusted:
• Cutter - Controls the cutting action of the media.
• GPIO - Controls the application of labels.
• Present Sensor - Controls the “on-demand” dispensing of labels.
• Rewinder - Controls the operation of the powered internal label rewinder.
Cutter
The following settings may be adjusted for printers with the cutter option installed:
Table 7: Cutter Settings
Note: *A positive value rotates the blade further.
GPIO
The following settings may be adjusted for printers with the GPIO option installed:
Table 8: GPIO Settings
Adjustments Options Ranges Default
Cutter Mode Off
Cut By Label
Cut By Job
Cut By Count
Off
Cut By Count 1
Cut Distance Adjust -100 to 100 dots 0
Cut Rotation Adjust -10 to 10* 0
Adjustments Values Ranges Default
GPIO Mode Off
Custom
Off
Slew Speed 2 - 10 IPS 8 IPS
Pulse Width 1 - 2000μs 1000μs