Datamax-O'Neil Performance series User Guide - Manual (Page 66)

3 | Connections and Setup
Performance Series User’s Guide 58
Note: Retain the thumbscrew for future re-installation of the media plate.
4. Align the present sensor with the power/data connector and tighten the captive
screw to secure it to the platen carriage assembly.
Figure: 3 - 48 Present Sensor Installation
5. Close the present sensor until it magnetically locks into place.
6. Activate the present sensor option in the Options menu by selecting Menu > Basic
> Printer Mode > Present Sensor Enable.
Captive Screw