Datamax-O'Neil Performance series User Guide - Manual (Page 44)

3 | Connections and Setup
Performance Series User’s Guide 36
8. Rotate the printhead carriage assembly counter-clockwise until it latches.
Figure: 3 - 22 Latch the Printhead Carriage Assembly
9. Rotate the printhead latch lever counter-clockwise to lock the printhead carriage.
Note: Ensure the printhead latch lever has locked the printhead mechanism before
printing or the printer will enter a no-print condition.
Note: When removing the ribbon from the ribbon rewinder hub, grasp the center of the
ribbon, squeeze tightly and pull outward away from the rewinder hub. The rewinder hub
will collapse slightly allowing the used ribbon to slide off.