Datamax-O'Neil Performance series User Guide - Manual (Page 49)

Connections and Setup | 3
41 Performance Series User’s Guide
Note: For thicker labels, remove the label from the backing and insert the backing into
the groove.
Figure: 3 - 24 Media Rewinder
Note: Be sure to center align the paper on the rewinder shaft. Otherwise, the paper will
not rewind tightly.
5. Reinstall the metal clasp into the grooves.
Perform the following steps to set the rewinder direction:
1. Select Menu > Basic > Printer Mode.
2. Select the rewinder direction.
Note: Upon exiting the utility, a prompt will ask the user to accept the changes or reject
them.
Note: If the rewinder is enabled and the Auto Present Distance is set, then the printer
present distance will be set to zero (0) to avoid unnecessary backing up.