Datamax-O'Neil Performance series User Guide - Manual (Page 133)

Terms and Definitions | 8
161 Performance Series User’s Guide
Advanced > Printer > Auto
Advanced > Printer > Speeds
Advanced > Printer > Alarms
Advanced > Printer > Options
Advanced > Printer > Options > Cutter
Terms Definitions
Auto Load The media loads automatically when detected in the media
guides and the head is closed and latched.
Auto Option Detect Automatically generates a warning if an option is enabled yet
not detected.
Auto Calibrate Calibrate paper sensors while auto-loading the media.
Auto Present Distance Automatically sets the present distance based on the detected
hardware.
Auto Tension Automatically selects the tension based on the media width
guides, paper and ribbon type or ID selected.
Auto Pressure Automatically selects the head pressure based on the selected
Paper/Ribbon ID.
Auto Speed Adjust For labels less then 0.5” in length, the printer will automatically
lower the print speed to prevent pausing on print batches.
Terms Definitions
Print Speed Controls the rate of the label movement during printing.
Feed Speed Controls the rate of the label movement during feed.
Reverse Speed Controls the rate of the label movement during backup
positioning.
Terms Definitions
Error Sound Controls the enabling and tone of the error buzzer.
Warning Sound Controls the enabling and tone of the warning buzzer.
Paper Low Warning Enables or disables the paper low warning.
Paper Out Warning Enables or disables the paper out warning.
Cover Open Warning Enables or disables the cover open warning.
Reprint on Error Enables or disables the automatic reprint on error.
Terms Definitions
Cut By Count Sets the label increment to cut.
Cut Distance Adjust Allows for the adjustment of the cut position due to mechanical
tolerances.