Datamax-O'Neil Performance series User Guide - Manual (Page 77)

Menu System | 4
99 Performance Series User’s Guide
Menu
The Menu button provides the user with access to the system settings and also allows
for the enabling of options. The Menu screen displays the following options:
• Basic
• User
• Advanced
• Tools
• Language
• Test
1. Basic
Selecting the Basic button allows for access to the basic settings. These include the
following:
• Printer Mode
• Media
• Print Adjust
Printer Mode
The printer is available with several options which are enabled or disabled via the Printer
screen. Three of the modes cannot happen concurrently so the highest priority mode will
take precedence. The order is as follows:
1. Pause Mode (High)
2. Present Sensor Enable (Medium)
3. Applicator Mode (Low)
a. Cutter Mode
The cutter supports the cutting of media into separate labels.
For printers with a print media cutter installed, select from the following Cutter Mode
options:
• Off
• Cut By Label
• Cut By Job
• Cut By Count
Cut By Count enables the user to specify the number of labels printed prior to being cut.
Select the Cut By Count field and enter the number of labels to be printed.