Datamax-O'Neil Performance series User Guide - Manual (Page 134)

8 | Terms and Definitions
Performance Series User’s Guide 162
Advanced > Printer > Options > Present Sensor
Advanced > Printer > Options > Rewinder
Advanced > Media
Advanced > Communications
Advanced > Communications > Ethernet
Cut Rotation Adjust Allows for the fine tuning of the cutter blade rotation.
Terms Definitions
Present Sensor Enable Controls the on-demand dispensing of labels.
Present Distance Adjust Sets the label stop position past the start of print position.
Terms Definitions
Rewinder Mode Sets the rewinder direction for the paper.
Rewinder Tension Adjust Allows for the fine adjustment of the rewinder motor.
Terms Definitions
Paper Sensor Type Select the top-of-form identification method for the media.
Paper Sensor Side Determines which sensor is to be used for top-of-form or an
out-of-paper condition.
Ribbon Mode Enables the operation of the ribbon.
Heat The adjustment of the energy required for printing with a
specific paper and ribbon.
Heat Balance The adjustment of the energy distribution required for printing
with a specific paper and ribbon.
Head Pressure (Suggested for
p1115) Controls the amount of pressure the printhead mechanism
exerts.
Rewinder Tension Provides for the fine adjustment of the rewinder motor.
Ribbon Tension Front Provides for the fine adjustment of the front ribbon motor.
Ribbon Tension Rear Provides for the fine adjustment of the rear ribbon motor.
Ribbon Low Diameter Sets the threshold for a low ribbon warning.
Terms Definitions
DHCP Enables or disables DHCP auto addressing for a static setting.
IP Address The user-entered value that sets the static IP of the interface.
Subnet Mask The user-entered value setting the static sublet assigned to the
interface.
Terms Definitions