Datamax-O'Neil Performance series User Guide - Manual (Page 32)

3 | Connections and Setup
Performance Series User’s Guide 24
Note: Ensure the media roll turns freely. There should be 0.8mm to 1.5mm clearance
between the media adjustment levers and the media roll.
8. Rotate the media guide adjustment knob counter clockwise to widen the guides
until they are set slightly wider than the width of the media.
Figure: 3 - 7 Media Guide Adjustment Knob
9. Route the media under the bouncer and into the media guides.
Figure: 3 - 8 Media Guides
Media Guides