Datamax-O'Neil Performance series User Guide - Manual (Page 78)

4 | Menu System
Performance Series User’s Guide 100
b. Rewinder Mode
Rewinder Mode controls the operation of the powered internal label rewinder.
For printers with a print media rewinder installed, select from the following Rewinder
Mode options:
• Off
• Clockwise
• Counter Clockwise
c. Present Sensor
The Present Sensor option controls the on-demand dispensing of labels.
To enable or disable the installed Present Sensor option, select or deselect the
corresponding checkbox.
d. GPIO Mode
The GPIO Mode enables or disables the applicator function from the printer. For printers
with an applicator connected, select from the following settings:
• Off
• Custom
d. Pause Mode
The Pause Mode option allows the user to prompt for the next label.
To enable or disable the Pause Mode, select or deselect the corresponding checkbox.
Media
Selecting the media button allows the user to change the print media and ribbon settings.
The printer may automatically set up certain parameters once the paper and ribbon types
have been inputted either using the Media ID or manual entry.
a. Media ID
The user can qualify various media and ribbon types and has assign an ID value to them.
After pressing the Media ID button, ID values can be selected which will configure the
printer to the optimum print settings.
1. Using the up and down arrows, select the appropriate Paper ID.
2. If applicable, tab to the Ribbon ID page and use the up and down arrows to
highlight the appropriate value.
3. Select the Home button and select either the green Accept button or the Red reject
button.