E-Mon E-PS-S-HV-RTU - Manual (Page 108)

Chapter 5 Configuring the PowerSmart Socket PQM Configuring Recorders
108 PowerSmart Socket Power Quality Meter
settings and to select a proper daily tariff schedule for any
day within a year.
The above picture gives you an example of a single-season
tariff schedule configured for weekends and the designated
U.S.A. holidays.
To configure your season tariff schedule:
1. In the “Season/Period” box, select the season, and in
the “Day Type” box, select a day type for this calendar
entry.
2. Select the time interval when this daily tariff schedule
is effective, based on the start and the end weekdays
and, for a multi-season schedule, on the start and the
end month for the selected season. It does not matter
which order of weekdays or months you select: the
meter recognizes the correct order.
3. For exception days like designated holidays, select a
specific day either by specifying a day and month, or
by selecting a month, a week and a weekday within
the month.
NOTE
The PowerSmart Socket PQM TOU calendar provides an
embedded schedule of Hebrew holidays till 2039 for Israeli
customers. To enable the automatic holiday schedule, select
Israel in the Country box in the Local Settings setup (see
Local Settings ).
To configure your DST schedule:
1. Select DST in the “Season/Period” box.
2. Select the DST start month and day in the “Month” and
“Day” boxes.
3. Select the DST end month and day in the “Till Month”
and “Till Day” boxes.
4. In the “Year” box, select a year for which these dates
will be effective.
5. Repeat steps 2-4 for all years for which you wish to
provide a DST schedule.
To make your DST schedule effective:
1. Go to the Local Settings setup (see Local Settings ).
2. Select “Scheduled” in the Daylight Saving Time (DST)
box.
3. Send your new setting to the meter.
Configuring Recorders
The PowerSmart Socket PQM is provided with a 16-MByte
onboard flash memory for data, event and waveform
recording.