E-Mon E-PS-S-HV-RTU - Manual (Page 75)

Chapter 5 Configuring the PowerSmart Socket PQM General Meter Setup
PowerSmart Socket Power Quality Meter 75
Device Options and Mode Control
Using the Front Display
To enter the device options setup menu, select Options from
the main menu.
To enter the TEST mode menu, select Test Mode Setup from
the main menu. You can also directly enter the TEST menu
by extended press on the TEST button located under the
meter cover (see
The TEST Button in Chapter 3).
See Viewing and Changing Setup Options in Chapter 3 for
information on navigating in menus.
See the table below for available options.
Using Power Software
Select General Setup from the Meter Setup menu, and then
click on the Device Options tab.
NOTE
Test Mode options and other device options have different
security levels. You may not be allowed to change the device
options if the user password you provided does not have
required permissions.