E-Mon E-PS-S-HV-RTU - Manual (Page 71)

Chapter 5 Configuring the PowerSmart Socket PQM Configuring Communications
PowerSmart Socket Power Quality Meter 71
Parameter Options Default Description
XPW Server Port 0-65535 5001 The TCP service port of the
eXpertPower server
XPW Client Enabled NO, YES NO Enables operations of the
eXpertPower client
Time to Next Session,
min 1-99999 The time remaining to the
next connection session
Connection via Network Ethernet,
GPRS/Modem
Ethernet Automatically selected
depending on the network
module installed
Time to close the
Session, min 1-n 1 The time to keep session
open while in idle state, it
is strongly to recommend
to setup no more than 5
min.
NOTES
1. Do not enable the eXpertPower client in your meter if
you do not use the eXpertPower TM service.
2. Do not change the connection period setting. The
eXpertPower server updates it automatically.
Setting-Up TCP Notification Client
Select Communication Setup from the Meter Setup menu,
and then click on the TCP Notification Client Setup tab.
The TCP notification client can establish connections with a
remote Modbus/TCP server and send notification messages
either on events, or periodically on a time basis. See the
PowerSmart Socket PQM Modbus Reference Guide for more
information on the client operation and the notification
message layout.