E-Mon E-PS-S-HV-RTU - Manual (Page 113)

Chapter 5 Configuring the PowerSmart Socket PQM Configuring Recorders
PowerSmart Socket Power Quality Meter 113
2. Select a partition type for your file.
3. Select the number of parameters you want to be
recorded in the file records.
4. Select the maximum number of records you want to
be recorded in the file.
5. Click OK, and then send your new setup to the
meter, or save to the device database.
To define the contents of the file:
1. Highlight the data log file row with the left mouse
button, and then click on the “Setup Recorder” button,
or click on the “Data Recorder” tab and select the
corresponding log number.
2. Configure the list of parameters to be recorded in a log
file. You are not allowed to select more parameters
than you defined when configuring your file. Refer to
Appendix A for a list of available parameters.
3. For your convenience, Power Software follows your
selection and helps you configure a series of the