E-Mon E-PS-S-HV-RTU - Manual (Page 64)

Chapter 4 Using Power Software Configuration tool Authorization and Security
64 PowerSmart Socket Power Quality Meter
Batch Upload
To upload all setups from the device to the site database at
once:
1. Check the On-line button on the toolbar.
2. Select the device site from the list box on the toolbar.
3. Select Upload Setups from the Meter Setup menu.
NOTE
The passwords setup is never uploaded via the Batch Upload
and may not be read from the meter. When you open the
Passwords setup dialog, all passwords are zeroed.
Authorization and Security
Every time you try to send the setup data to the meter, you
are prompted for the password.
Enter the password and click OK. If your authorization was
successful, you are not prompted for the password again until
you close the dialog window.
See Meter Security in Chapter 2 for more information on the
meter password security.