E-Mon E-PS-S-HV-RTU - Manual (Page 151)

Chapter 7 Monitoring Meters Viewing Real-time Data
PowerSmart Socket Power Quality Meter 151
Chapter 7
Monitoring Meters
Viewing Real-time Data
Real-time data is continuously retrieved from your devices
and updated on the screen at the rate you defined in the
Instrument Setup.
To get real-time data from your device:
1. Ensure that the On-line button on the Power Software
toolbar is checked.
2. Select the device site from the list box on the Power
Software toolbar.
3. Point to RT Data Monitor on the Monitor menu, and
then select a data set you want to view.
Organizing Data Sets
Power Software supports 33 programmable data sets with up
to 40 data parameters. Set #0 is intended for simple meters,
which have a limited number of parameters, and is not
recommended for the use with the PowerSmart Socket PQM.
To re-organize data sets, select RT Data Sets from the
Monitor menu or click on the button
on the local toolbar.
Some data sets are preset for your convenience and others
are empty. You can freely modify data sets.