Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 102)

Section 5: Accessories
2/2013 102 51303 Rev. 1
6.2. PROGRAMMING THE TRAFFIC LIGHT CONTROL, CONTINUED
20. Press the SAVE CHANGES button
when any changes are made, or they will
be lost.
21. Press PAGE FORWARD .
22. To the right of the Event to Signal:, select
TIME DELAY OF X SECONDS
Control button.
23. Click on the correct time value.
– This is the Time Delay from when the
truck enters the scale.

DEFAULT = 6 SECONDS
24. Select the TRAFFIC DIRECTION
Control button.
– This selects which way the vehicles will
normally be traveling.
25. Select either INBOUND or
OUTBOUND .
26. Select either the SET ALL OUTPUTS
ON or the SET ALL OUTPUTS OFF
Control Button.
– Activates or deactivates the Traffic
Lights.
 Press the SAVE CHANGES button
when any changes are made, or they will
be lost.
 Select BACK: TRAFFIC LIGHT CONTROL to return to the Traffic Light
Control Menu.