Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 18)

Section 2: Operations
2/2013 18 51303 Rev. 1
2.3. PROPER SHUTDOWN PROCEDURE
1. An external keyboard must be used to perform the shutdown.
2. Press the ALT + F5 key to begin the shut-down process from the weight
processing screen..
– A Shut Off Warning appears whenever ALT + F5
is pushed.
3. After proper shut-down is complete, ALWAYS turn off the
internal
power switch.
– Until the FB2550 DAT AC power is turned off from the inside cabinate power
– switch, it will continue to supply operating voltage to the instrument circuits.
4. The POWER-OFF (ALT + F5) is inactive when any Service Programming is
being completed.
C A U T I O N
FB2550 DAT must be shut down properly!
Failure to shut down properly can result in corrupting essential
software files necessary for proper operation, and may require
replacement of the 8GB Flash Drive.