Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 128)

Section 7: Network Application Configuration
2/2013 128 51303 Rev. 1
8.3. NETWORK SETUP PROCEDURE
8.3.1. NETWORK TERMINAL NAME
Follow these steps to setup the Network Name.
1. From the Weigh Screen, select ALT +
MENU .
2. Select LOGIN and enter the Service
Password
.
3. Select the CONFIGURATION MENU .
4. Page Forward twice.
5. Select NETWORK PARAMETERS .
6. Input a NETWORK NAME from the list
below.
– TERMINAL1 – TERMINAL4
– TERMINAL2 – TERMINAL5
– TERMINAL3
IMPORTANT NOTE: USE ONLY THE NETWORK NAMES LISTED ABOVE,
and be certain that they are not duplicated.
7. Press the SAVE CHANGES button when any changes are made or they will
be lost.
8. Return to the Weigh Screen.
9.
Shut down and restart the FB2550 DAT.
All setup changes will apply after the Instrument reboot.
IMPORTANT NOTE: Reboot the FB2550 DAT correctly, or program files can
become corrupted.
See
Section 9.3. Proper Shutdown Procedure.