Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 14)

Section 2: Getting Started
2/2013 14 51303 Rev. 1
1.6. UNPACKING
Follow these guidelines when unpacking all equipment:
 Check in all components and accessories according to the customer's order.
 Remove all components from their packing material, checking against the
invoice that they are accounted for and not damaged.
▪ Advise the shipper immediately, if damage has occurred.
▪ Order any parts necessary to replace those which have been damaged.
▪ Keep the shipping container and packing material for future use.
▪ Check the packing list.
 Collect all necessary installation manuals for the equipment and accessories.
 Open the equipment and perform an inspection, making certain that all
hardware, electrical connections, and printed circuit assemblies are secure.
 Do not reinstall the cover if the final installation is to be performed after the
pre-installation checkout.
1.7. EQUIPMENT LOCATION
Position the equipment with these points in mind:
 Intense direct sunlight can harm the display.
 Airborne particles can activate the touch screen.
 Work areas should be relatively free from drafts and vibrations.
 Do not locate near magnetic material or equipment/instruments which use
magnets in their design.
 Avoid areas which have extreme variations in temperatures. Temperatures
outside the instrument’s specifications will affect the weighing accuracy of this
product.
1.8. SAFETY
Follow these safety precautions during operation:
 Properly shut down the equipment and remove power
before any cables or hardware is disconnected.
 Remove power to the equipment after a proper shut
down before servicing the equipment.