Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 73)

Section 4: Input/ Output
2/2013 73 51303 Rev. 1
5.1.2. EU-T432 THERMAL PRINTER SETTINGS
SETTINGS FOR DIP SWITCH DSW1
SW
NO. FUNCTION ON OFF FACTORY SETTING
1 BM Sensor Enabled Disabled OFF *
2
Interface Selection
See INTERFACE SELECTION
chart below.
OFF
3 OFF
4 Serial Interface
Handshaking XON /
XOFF DTR/DSR or
CTS/RTS OFF **
5 Serial Interface Parity
Check Yes No Off (*2)
6 Serial Interface Parity
Selection Even Odd Off (*2)
7
Serial Interface Baud
Rate Selection See TRANSMISSION SPEED
chart below.
Off (*2)
8 Off (*2)
INTERFACE SELECTION
SWITCH NUMBER
2 3
Parallel Interface (IEEE 1284) OFF OFF
Serial Interface (RS-232) ON
Optional Interface ON ON or OFF
TRANSMISSION SPEED (BPS) – BAUD RATE
SWITCH NUMBER
7 8
4800 ON ON
9600 OFF ON
19200 OFF ON
38400 OFF OFF
Two DIP switches are mounted on the
control board module.
The EU-EU-T432 Model is a kiosk
printer, placed inside the FB2550
Instrument.