Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 130)

Section 7: Network Application Configuration
2/2013 130 51303 Rev. 1
8.3.2. SYNCHRONIZING THIS TERMINAL,
CONTINUED
The tables noted below populate in the Remote Terminal with data from the other
selected Terminal.
– Customers – Products
– Tares – Product Groups
– Product Groups Products
 After this process, complete and incomplete transactions are instantly shared with
all Terminals on the Network.
 Calibration cannot be performed from a remote location. It must be performed at
the Terminal to which the scale is physically connected.
– This is also true for viewing cell diagnostics, peak weights, and cell errors.
 Traffic Light Controls cannot be configured from a remote location, but only at the
Terminal to which they are physically connected.