Camera setup, continued – Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL User Manual
Page 105
Advertising
Section 5: Accessories
2/2013
105
51303 Rev. 1
6.3.2. CAMERA SETUP, CONTINUED
7. From the Initial Login Screen select the
SETUP
option.
– Located in the upper-right of the window.
8. Select
SYSTEM OPTIONS
,
found in the bottom-left column of page.
9. In the User Settings from initial screen, check
ENABLE ANONYMOUS
VIEWER LOGIN
.
10. Uncheck Enable Basic Setup.
11. If IP Address changes are not needed, click
SAVE
,
and then exit the browser.
Advertising