Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 72)

Section 4: Input/ Output
2/2013 72 51303 Rev. 1
5.1.1. TM-U230 TAPE PRINTER SETTINGS, CONTINUED
DIP Switch 2 Settings (SERIAL INTERFACE)
SWITCH FUNCTION ON OFF
1 Sections number of characters per
line (cpl) 7 x 9 font/ 9 x 9 font
42/35 40/33
2 For internal use only (Auto-cutter)
(do not change) Enabled Disabled
3 Pin 6 reset signal Used Not used
4 Pin 25 reset signal Used Not used
5 PAPER OUT LED flashing pattern Flashes Lights on
6 For internal use only (flash memory
rewriting) (Do not change) Enabled Disabled
7 For internal use only (Internal
synchronization) (Do not change) Asynchronous Synchronous with clock
8 Internal buzzer Disabled Enabled
Cable
25932 Wiring for COM 1-3
Cable 25932 Wiring for Serial Expansion Module*
* Must remove the 9-pin connector.
DB-9
INSTRUMENT
DESCRIPTION WIRE
COLOR
DB-25 PRINTER DESCRIPTION
2 RxD BR 2 TxD
3 TxD R 3 RxD
4 DRT O 6 DSR
5 SG Y 7 SG
6 DSR G 20 DTR
7 RTS BL 5 CTS
8 CTS BK 4 RTS
RS232
PORT 1: COM7 XX
DESCRIPTION WIRE
COLOR
DB-25
PRINTER
DESCRIPTION
TB1a-2 RxD BR 2 TxD
TB1a-3 TxD R 3 RxD
TB1a-4 DRT O 6 DSR
TB1a-5 SG Y 7 SG
TB1b-6 DSR G 20 DTR
TB1b-7 RTS BL 5 CTS
TB1b-8 CTS BK 4 RTS