Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 57)

Section 3: Configuration Menu
2/2013 57 51303 Rev. 1
4.4.4. METHOD 2 - CUSTOMIZING OUTPUT DATA
STRINGS
The FB2550 DAT can also be customized to support numerous manufacturers
software interfaces to peripheral devices.
– When a data string protocol that is required is not similar as one of the pre-
configured outputs, the output data string must be programmed
manually using the BUILD, TOKENS, AND WEIGHTS menus.
Follow these steps to customize the Output Data String.
1. Using an external keyboard, press ALT +
HOME.
2. Select LOGIN
.
3. Enter the Supervisor Password.
4. Select the CONFIGURATION MENU.
5. Press PAGE FORWARD once.
6. Select CONFIGURE OUTPUTS.
– Touch the screen to select
CONFIGURE COM X, where X is
the desired COM port location to
configure the output data string.
7. Touch the screen to select LOAD .