Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 15)

Section 2: Getting Started
2/2013 15 51303 Rev. 1
1.9. USERS’ RESPONSIBILITIES
 All electronic and mechanical calibrations and/or adjustments required for
making this equipment perform to accuracy and operational specifications
should be performed by trained service personnel.
 Absolutely no physical, electrical or program modifications other than selection
of standard options and accessories are to be made to this equipment.
▪ Electrical connections other than those specified may not be performed, and
physical alterations (holes, etc.) are not allowed.
 The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures, and must be replaced as units.
▪ Replacement of individual components is not allowed.