Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 83)

Section 4: Input/ Output
2/2013 83 51303 Rev. 1
5.5. REMOTE DISPLAY SETUP AND CONFIGURATION
The FB2550 DAT has two modes of operation.
 Continuous Display.
 Display On Print.
The remote display output may be configured for a RS232 interface or a 20 mA
interface.
4.5.1. SERIAL 20mA CONFIGURATION (MULTI-
FUNCTION BOARD)
The following steps listed will provide the
process to configure the FB2550 DAT for use
with the serial 20 mA to a remote display.
1. Using an external keyboard, press ALT +
HOME.
2. Select LOGIN .
3. Enter the Supervisor Password.
4. Select the CONFIGURATION MENU .
5. Press PAGE FORWARD .
6. Select REMOTE DISPLAY .
7. Leave the settings as shown in the image to
the right.