Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 156)

2/2013 156 51303 Rev. 1
Appendix VI: Remote Serial Communication
Commands
COMMAND DESCRIPTION
A Auto Tare Active scale
G Turn Traffic Light Green (Manual Mode only)
LA Change Traffic Light to Automatic mode
LM Change Traffic Light to Manual mode
R Turn Traffic Light Red (Manual Mode only)
S# Change Active Scale (where # = scale number)
Txxxxx Set Tare on Active scale (where xxxxx = tare weight value required)
T#,xxxxx Tare entry for a specific scale (where # = scale number, and where xxxxx = tare
weight value required)
U# Toggle Units on a scale (where x = scale number)
u Toggle All Scales Units
U Toggle Units on Active scale
Z# Zero one scale (where # = scale number)
z Zero all scales
Z Zero Active scale
P Print Active scale
W Demand request for a Weight output on the Active scale