Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 34)

Section 2: Operations
2/2013 34 51303 Rev. 1
2.8. PRODUCT GROUPS
A PRODUCT GROUP is a filter to permit only specifically selected products to be
used by a customer.
– These groups are assigned to a customer from the Edit Customers menu.
– Supervisor or Service Level access is required to add or edit these Product
Groups.
WORKING EXAMPLE
A vehicle weighs Inbound on the scale. The scale operator is prompted for Loop ID,
Customer ID
, and Product ID. When the Product ID is selected, a drop-down
menu appears with the products the customer is limited to use.
Product IDs must be created first, before a Product Group is created.
2.8.1. ADDING OR EDITING PRODUCT GROUPS
1. Press the MENU key.
2. Select LOGIN .
3. Enter the Supervisor Password.
4. Select the CONFIGURATION MENU .
5. Select DATABASE EDITORS .