Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 56)

Section 3: Configuration Menu
2/2013 56 51303 Rev. 1
4.4.3. METHOD 1, CONTINUED
17. Touch the data field to the right of the Parity legend and a list of items will
appear from which a selection is made.
18. Select the required PARITY rate from the
menu list.
19. Touch the data field to the right of the Data
Bits legend and a list of items will appear
from which a selection is made.
20. Select the required DATA BIT from the
menu list.
21. Touch the data field to the right of the Stop
Bits legend and a list of items will appear
from which a selection is made.
22. Select the required STOP BIT from the
menu list.
23. Press the SAVE CHANGES button when
any changes are made otherwise the
changes will be lost.
24. Select RETURN TO WEIGHING to test
and verify the output is producing the
desired results.
 Selecting BACK: CONFIGURE COM1
returns to the CONFIGURE COM1 Menu.