Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 48)

2/2013 48 51303 Rev. 1
Section 3: Audit Trail
3.1.1. GETTING STARTED
1. Select LOGIN .
2. Enter the Supervisor Password.
3. Select AUDIT TRAIL .
4. Choose either CALIBRATION AUDIT
TRAIL , or CONFIGURATION AUDIT
TRAIL .
3.1.2. CALIBRATION AUDIT TRAIL
In a CALIBRATION REPORT , the unique
count value(s) can only be viewed, and not
edited.
 Select BACK: AUDIT TRAIL to return
to the Audit Trail Menu.
3.1.3.. CONFIGURATION AUDIT TRAIL
The CONFIGURATION AUDIT TRAIL option is provided for a Weights and
Measures Official.
– Such an official can view the AUDIT
TRAIL for calibration and configuration
changes.
– This option is limited to view only
access
.
– It displays the unique count value
showing the date(s) and time(s) the
calibration or configuration was
changed for up to one (1) scale.
– In a CONFIGURATION REPORT , the unique count value(s) can only be
viewed, and not edited.