Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 108)

Section 5: Accessories
2/2013 108 51303 Rev. 1
6.3.5. VIDEO CAMERA PROGRAMMING
1. Open the CONFIGURATION MENU .
2. Press PAGE FORWARD twice.
3. Select VIDEO CAMERA INPUTS .
The FB2550 DAT has two (2) IP video camera
inputs.
– These can be stored with the Transaction
Data
– They can be displayed on the FB2550
DAT’s Weigh Screen, Idle Screen:
setting, in various ways.
4. To activate this feature, select YES to one
or both of the CAMERA 1 or 2
ENABLED options.
5. Select the CAMERA 1 or 2 TYPE .
6. Enter the CAMERA 1 or 2 IP address.
7. Press PAGE FORWARD .
8. Select either NONE, CAMERA 1,
CAMERA 2, or TOGGLE for each of the
button options listed below.
– The video camera can toggle between
the two cameras or display them
individually.
 Idle Screen  Select Screen
 Store Trans  Store Blind Ctr (Control)
 Print Ticket  File Format