Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 118)

Section 6: Service & Maintenance
2/2013 118 51303 Rev. 1
7.1.2. DATABASE RESTORE, CONTINUED
C. PROCEDURE RESTORE DATABASE FROM DEFAULTS:
1. Select LOGIN.
2. Enter the Supervisor Password.
3. Select CONFIGURATION MEN U .
4. Select DATABASE MAINTENANCE
5. Select RESTORE DATABASE FROM
DEFAULTS .

A warning will presented display of whether or
not to proceed.
 It will also indicate to ensure the correct one
has been selected.
 Press
CONTINUE button to complete the
process, or press the CANCEL button to stop
the procedure.
– This process could take several minutes.
6. When the Database Default Restore process
is complete, press the CONTINUE button to
return to the Database Maintenance menu.
7. Press RETURN TO WEIGHING to exit to
the Weigh processing screen.