IDEC MicroSmart Pentra - Manual (Page 110)

12: W EB S ERVER
12-2 W EB S ERVER CPU M ODULE U SER ’ S M ANUAL FC9Y-B1278
Programming WindLDR
1. Select Configuration from the WindLDR menu bar, and then click Web Server.
The Function Area settings dialog box appears.
Web Server Settings
Web server port: Specify the port number for the Web server of the Web server CPU module. The default port number is
80.
User name: Specify the user name used for authentication. The default user name is "administrator."
Password: Specify the password used for authentication. The default password is "password." The password is shown as *
in the dialog box.
User Web Page
Enable data register monitoring: Check when using the system library, such as numeric control or graphics. This option is
applied to html and htm files only.
Monitoring interval (ms): Specify the interval between communication requests to the Web server CPU module when
monitoring the Web server CPU module using system library. The monitoring interval can be specified in ms.
Trend monitor interval (ns): Specify the interval for reading device data used in the trend monitor. The trend monitor
interval is the product of this value and the monitoring interval.
Options
Redirect target: Specify the redirect target when the system top page of the Web server CPU module is accessed. When
you want to be redirected to the system web top page, select System Web Top Page from the pull-down list. Select
Disable Redirect to disable redirect. Redirect may not work depending on each Web browser.
Language: Select language for the system web pages.
Enable Web server: Uncheck to disable Web server functions of the Web server CPU module. When this is unchecked,
the Web server port remains closed, and connection to the Web server using the Web browser is prohibited.
When the Web server is enabled, you will be asked to enter a user name and password. You can access the Web server
once you enter the correct user name and the password on the dialog box shown on the browser